DDR4 3600 VS 3200

Besides installing a high-performance processor, an ultra-fast RAM can significantly improve your system’s performance and eliminate any lagging even while performing the most demanding tasks.

And when it comes to choosing the best RAM for your gaming rig, the perfect choice is a DDR4 RAM module. Unlike DDR3 RAMs, DDR4 RAMs are designed to offer improved transfer rates and reduced power consumption. This means that they can easily reach higher speeds, offering you a more efficient and smoother computing experience.

Whether you’re upgrading your system or you’re building one from scratch, there are several things you need to consider to make sure you’re getting the best DDR4 RAM. One the factors is the capacity of the RAM since it dictates the amount of data it can temporarily store at once. The next factor to pay attention to is the RAM’s speed as it determines how fast it runs.

In this article, we’re going to help you understand the key similarities and differences between the DDR4 3200 vs. 3600, so you can choose the best one for your rig.

Similarities between DDR4 3200 vs. 3600

Number of pins

Probably the most notable similarity between the two memory modules is that they both use 288 pins to connect to your motherboard. Also, both DDR4 3200 and 3600 modules are designed with curved edges to facilitate seamless insertion and minimize placing excessive force on the PCB as they’re installed.

Compatible Chipsets

Additionally, both memory modules are made compatible with the latest XMP 2.0 supported motherboards, including Intel series and AMD series. This means that they can run multiple programs simultaneously and overclock at incredibly high speeds.

Power Voltage

Both the DDR4 3200 and DDR4 3600 are optimized to operate at low voltages that range between 1.2V and 1.4V. This makes them more power efficient and able to operate at higher speeds in the long-term. With the improved stability, you can overclock both of the RAMs to achieve even higher clock speeds without consuming more power or demanding advanced cooling systems.


Differences between DDR4 3200 vs. 3600

Clock Cycles (Clock Speeds)

DDR4 RAMs should have stock speeds of up to 2400MHz by default, but some manufacturers overclock their modules to operate at higher stock speeds than that.

For instance, in our case, the DDR4 3200 RAM has stock clock speeds rated to 3200MHz and 3600MHz for the DDR4 3600 module. Therefore, this means that the ddr4 3200 RAM can efficiently handle 3.2 billion cycles per second, while the one rated to 3600MHz performs 3.6 billion cycles every second.

As a rule of thumb, the more the number of cycles a memory can perform in every second, the higher the amount of data it can store and read.  So, since the ddr4 3600 module performs more memory clocks, it is significantly faster than the ddr4 3200 RAM. This also means that you’ll enjoy a smoother and faster experience when using the ddr4 3600 RAM.

CAS Latency

Apart from the clock cycles, another thing that can affect your RAM’s performance is the CAS latency. CAS or Column Access Strobe is usually how many cycles your RAM performs from when it receives a command to when it responds. Latency, on the other hand, is typically the delay period from when the RAM is issued a command to the time it responds.

DDR4 3200 memory kit, for instance, has a CAS latency that ranges between 14 and 16 while the memory rated to 3600 ranges between 15 and 19. If both have the same latency, the DDR4 3600 RAM will be much faster than DDR4 3200.

However, a higher RAM frequency does not always translate to improved performance. For instance, a RAM rated to 3600 MHz with a high latency of 19 will be a lot slower than a 3200MHz RAM with a low latency of 15. But with both RAM modules using the same CAS latency, the DDR4 3600 memory will be faster than the module rated to 3200 MHz.

Memory Capacity

For the capacity, both the ddr4 3200 and 3600 RAM can support a capacity threshold of up to 64GB. As a rule of thumb, the greater the capacity of your RAM, the better and faster your PC will run. This means that you would realize better PC performance when using a 3600 RAM kit with a capacity of 32GB compared to a 3200 memory with 8GB.

While a RAM’s speed is crucial to your PC’s performance, there are instances you would choose a 3200 MHz RAM with a high capacity of 64GB instead of a 3600 MHz kit with a lower capacity of 16GB. This means having more RAM capacity is essential than getting a faster RAM.

Having more capacity means that your RAM can store more data, which enables your CPU to faster access the resources it requires. This way, you can smoothly run multiple programs on your system without any lagging.


Conclusion

To conclude, both of the RAM types have their own benefits and shortcomings. The two RAMs are specially designed to improve your PC’s performance, whether you’re running the latest games or editing videos and photos with high resolutions. They also operate at incredibly low power voltage, meaning you can easily overclock them to achieve even higher speeds.

When it comes to choosing between the DDR4 3200 versus 3600, you should focus on their rated clock speeds, memory capacity, and CAS latency. In doing so, you should be able to get one that offers a great balance between price and performance.